| MRC |
Requirement Statement |
Characteristics |
| AGVU |
INNER RING WIDTH |
0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| SR-1 |
MFR SOURCE CONTROLLING REFERENCE |
107CS002 |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| AAZE |
SHANK DIAMETER |
0.3750 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP E52100 INNER RING STEEL COMP 4620 ROD END BODY STEEL COMP E52100 ROLLER RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL STEEL COMP 430 SHIELD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE ROD END BODY MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER 66 FED STD SINGLE MATERIAL RESPONSE SHIELD |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| ADZG |
LUBRICATION MATERIAL |
GREASE |
| AGZA |
ALIGNMENT TYPE |
SELF-ALIGNING |
| SUPP |
III SUPPLEMENTARY FEATURES |
FLIGHT SAFETY CRTICAL AIRCRAFT PART |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AGGY |
SHANK THREAD LENGTH |
0.9700 INCHES MINIMUM AND 1.0300 INCHES MAXIMUM |
| AGXH |
LENGTH FROM BORE CENTER TO SHANK END |
1.8100 INCHES MINIMUM AND 1.8700 INCHES MAXIMUM |
| AGVT |
OUTER RING WIDTH |
0.3600 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3A |
| ABXV |
BORE DIAMETER |
0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
DOUBLE EYE BEARING |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| SR-1 |
MANUFACTURERS CODE |
77272 |
| CTLK |
SELF-ALIGNMENT ANGLE |
45.00 DEGREES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AGYK |
SHIELD QUANTITY |
2 |
| ABHP |
OVERALL LENGTH |
3.9400 INCHES NOMINAL |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
SUPP |
| AHAW |
SELF-ALIGNMENT LOCATION |
INTERNAL |
| AGYW |
BEARING SEAL TYPE |
CONTACT |
| AGYJ |
SEAL QUANTITY |
2 |
| ADGA |
OVERALL OUTSIDE DIAMETER |
1.0800 INCHES NOMINAL |
