| MRC |
Requirement Statement |
Characteristics |
| STYL |
STYLE DESIGNATOR |
A7A ANGLE FLANGED ENDS |
| CBBL |
FEATURES PROVIDED |
BONNET PACKING |
| CWCK |
NOMINAL THICKNESS |
0.438 INCHES ALL ENDS |
| AQLR |
VALVE OPERATION METHOD |
MANUAL |
| ADQU |
FLOW CONTROL DEVICE |
DISK |
| MATT |
MATERIAL |
COPPER ALLOY 922 BODY COPPER ALLOY 922 FLOW CONTROL DEVICE NICKEL ALLOY SEAT NICKEL ALLOY STEM |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
4.250 INCHES ALL ENDS |
| CQGM |
MAXIMUM OPERATING PRESSURE |
100.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| AEHZ |
MAXIMUM OPERATING TEMP |
425.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADST |
BONNET ATTACHMENT METHOD |
THREADED |
| CWCL |
FIRST CONNECTION FACE TO CENTERLINE DISTANCE |
2.875 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-C-390,ALLOY D4/D FED SPEC SINGLE MATERIAL RESPONSE BODY QQ-C-390,ALLOY D4/D FED SPEC SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE MIL-N-20164 MIL SPEC SINGLE MATERIAL RESPONSE SEAT |
| TEST |
TEST DATA DOCUMENT |
80064-5000S4824-1385541 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CWCT |
BOLT CIRCLE NOMINAL DIAMETER |
3.125 INCHES ALL ENDS |
| CWCR |
SECOND CONNECTION FACE TO CENTERLINE DISTANCE |
2.875 INCHES |
| ARKN |
FLANGE SHAPE |
ROUND WITH HOLES ALL ENDS |
| CWDF |
FLANGE FACE DESIGN |
PLAIN ALL ENDS |
| CCFG |
VALVE SIZE |
1.000 INCHES |
| MEDA |
MEDIA FOR WHICH DESIGNED |
STEAM 1ST RESPONSE WATER-OIL-GAS 2ND RESPONSE |
| ADSR |
BONNET TYPE |
INSIDE SCREW |
| AWLS |
CONNECTION TYPE |
FLANGE ALL ENDS |
| AECS |
BOLT HOLE QUANTITY |
4 ALL ENDS |
| CWCQ |
BOLT HOLE NOMINAL DIAMETER |
0.562 INCHES ALL ENDS |
