| MRC |
Requirement Statement |
Characteristics |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
16.0910 INCHES |
| CWRS |
BORE NOMINAL DIAMETER |
0.7505 INCHES BOTH ENDS |
| CWZN |
BOLT HOLE CIRCLE NOMINAL DIAMETER |
13.750 INCHES AXIALLY THROUGH BODY, SECOND END |
| CWSN |
KEYWAY NOMINAL WIDTH |
0.6260 INCHES BOTH ENDS |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNS AXIALLY THROUGH BODY, FIRST END |
| CWNH |
TOOTH FORM |
STANDARD |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
4 THREADED AXIALLY THROUGH BODY, FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.8125 INCHES FIRST END 0.3750 INCHES SECOND END |
| AJLA |
TEETH QUANTITY |
127 |
| AGJS |
PITCH DIAMETER |
15.8440 INCHES NOMINAL |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWRM |
FACE NOMINAL WIDTH |
0.250 INCHES |
| CWSR |
NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM |
4.6275 INCHES BOTH ENDS |
| CWPP |
PRESSURE ANGLE |
14.5000 DEGREES |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
1.000 INCHES AXIALLY THROUGH BODY, FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| AAQL |
BODY STYLE |
WEBBED, OFFSET, SOLID |
| FEAT |
SPECIAL FEATURES |
0.5000 IN. BY 45 DEG CHAMFER ON BORE OF AA END 0.3125 IN. BY 45 DEG CHAMFER ON BORE OF BB END |
| CWTX |
HUB NOMINAL DIAMETER |
10.2500 INCHES FIRST END 10.3750 INCHES SECOND END |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
14 AXIALLY THROUGH BODY, FIRST END |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN FIRST END PLAIN SECOND END |
| MATT |
MATERIAL |
STEEL COMP 1045 OVERALL |
