| MRC |
Requirement Statement |
Characteristics |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-20.0 TO 20.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND |
| AEFP |
NONTURN DEVICE RADIUS |
0.562 INCHES NOMINAL |
| ABHP |
III OVERALL LENGTH |
2.812 INCHES NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
80.0 SINGLE SECTION |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| ABXF |
SHAFT LENGTH |
0.750 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.10 TO 0.10 SINGLE SECTION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
5.0 FREE AIR SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.50 INCH-OUNCES |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEFK |
MAXIMUM STARTING TORQUE |
2.00 INCH-OUNCES |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 NOMINAL |
| ADAQ |
BODY LENGTH |
2.000 INCHES NOMINAL |
| AEFY |
SHAFT END PLAY |
0.01500 INCHES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0 TO 5.0 SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
24446-772607 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ADAP |
MOUNTING BUSHING LENGTH |
0.375 INCHES NOMINAL |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 NOMINAL |
| ABPM |
BODY DIAMETER |
1.812 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.000 KILOHMS SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFN |
NONTURN DEVICE LOCATION |
AT 12 OCLOCK |
| AAPN |
SECTION QUANTITY |
1 |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| ADAV |
III OVERALL DIAMETER |
2.156 INCHES NOMINAL |
