| MRC |
Requirement Statement |
Characteristics |
| CPHM |
FORWARD END DESIGN |
TAPERED |
| CPTH |
AFTER BEARING SLEEVE OUTSIDE DIAMETER |
17.375 INCHES NOMINAL |
| CPJH |
FORWARD END COUPLING DESIGN |
DETACHABLE |
| SR-5 |
DESIGN CONTROL REFERENCE |
77713-03X2 |
| AEJZ |
DEPTH |
1.625 INCHES NOMINAL |
| AARX |
INSIDE DIAMETER |
9.000 INCHES NOMINAL |
| CPNC |
FORWARD END TAPER LENGTH |
1.167 FEET NOMINAL |
| ABHP |
OVERALL LENGTH |
35.281 FEET NOMINAL |
| NMBR |
QUANTITY |
2 |
| ABRV |
KEYWAY DEPTH |
1.317 INCHES NOMINAL |
| CPTT |
FORWARD END TAPER MAJOR DIAMETER |
7.250 INCHES NOMINAL |
| CPTS |
COVERING LOCATION |
SURFACES BETWEEN BEARING SLEEVES COVERED |
| APZX |
PROTECTIVE COVERING TYPE |
RUBBER |
| CTMS |
FORWARD END TAPER |
0.125 PER FOOT IN INCHES NOMINAL |
| CPJK |
FORWARD END COUPLING OUTSIDE DIAMETER |
28.000 INCHES NOMINAL |
| CPTC |
AFTER END DESIGN |
TAPERED |
| AAZR |
MAJOR DIAMETER |
10.000 INCHES NOMINAL |
| ABET |
THREAD LENGTH |
8.500 INCHES |
| CPNF |
THREADED FORWARD END |
NOT INCLUDED |
| MATL |
MATERIAL |
STEEL,MIL-S-23284,COLD ROLLED |
| ARQS |
CONSTRUCTION |
HOLLOW |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CPTP |
AFTER BEARING SLEEVE LENGTH |
6.250 FEET NOMINAL |
| CPJG |
AFTER END KEYWAY |
PROVIDED |
| AGYE |
SURFACE FINISH |
SMOOTH MACHINED |
| CPTD |
THREADED AFTER END |
INCLUDED |
| ABQB |
TAPER MAJOR DIAMETER |
16.000 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
96169 |
| CPTG |
FORWARD BEARING SLEEVE LENGTH |
3.120 FEET NOMINAL |
| CPJM |
FORWARD END COUPLING THICKNESS |
1.688 INCHES NOMINAL |
| AZRW |
THREAD QUANTITY |
4 PER INCH |
| AEVE |
KEYWAY QUANTITY |
3 AND 1 |
| BPJZ |
USAGE LOCATION |
CENTER |
| ABRR |
KEYWAY WIDTH |
1.813 INCHES MINIMUM AND 1.876 INCHES MAXIMUM |
| ABND |
TAPER LENGTH |
3.000 FEET NOMINAL |
| ABGL |
WIDTH |
2.750 INCHES MINIMUM AND 2.812 INCHES MAXIMUM |
| CPTF |
FORWARD BEARING SLEEVE OUTSIDE DIAMETER |
17.375 INCHES NOMINAL |
| CPJF |
FORWARD END KEYWAY |
PROVIDED |
| AKYN |
FURNISHED ITEMS AND QUANTITY |
COUPLING,1; COUPLING KEYS,4; PROPELLER KEY,2; PROPELLER NUT,1; COUPLING STUDS,12; COUPLING NUTS,24 |
| CPJJ |
FORWARD END COUPLING TYPE |
SLEEVE |
| CPJL |
FORWARD END COUPLING LENGTH |
1.375 FEET NOMINAL |
| APQB |
UNIT TYPE |
PROPELLER SHAFT SECTION |
| CTKF |
TAPER |
1.000 PER FOOT IN INCHES NOMINAL |
| ABKV |
OUTSIDE DIAMETER |
16.000 INCHES NOMINAL |
