| MRC |
Requirement Statement |
Characteristics |
| BZRR |
THREAD SERIES |
UNF |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| AFYS |
KEYWAY LENGTH |
0.625 INCHES NOMINAL |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE OR POSITIVE |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.316 INCHES MINIMUM AND 0.324 INCHES MAXIMUM |
| ELEC |
VOLTAGE IN VOLTS |
6.0 |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
16764 |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
40.0 |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
193.0 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.500 INCHES NOMINAL |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
1850 |
| SR-5 |
DESIGN CONTROL REFERENCE |
1105871 |
| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
1.375 INCHES NOMINAL |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
159.0 |
| AKAE |
MAXIMUM OPERATING ALTITUDE RATING |
NOT RATED |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.875 INCHES NOMINAL |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AWDP |
THREAD DIAMETER |
0.500 INCHES NOMINAL |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
18 |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ABPT |
SECOND STEP DIAMETER |
0.6684 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.719 INCHES NOMINAL |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| ABFF |
FURNISHED ITEMS |
WOODRUFF KEY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.312 INCHES NOMINAL |
| BCGN |
GROUNDING METHOD |
INTERNAL |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| ZZZV |
III FSC APPLICATION DATA |
ENGINEELECTRICAL SYSTEM,NONAIRCRAFT |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
8.118 INCHES MINIMUM AND 8.132 INCHES MAXIMUM |
| ABVA |
UNTHREADED PORTION LENGTH |
1.312 INCHES NOMINAL |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
NOT RATED |
| ABRR |
KEYWAY WIDTH |
0.125 INCHES NOMINAL |
| CFHL |
THREAD CLASS |
2A |
