| MRC |
Requirement Statement |
Characteristics |
| AAPE |
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS |
-20.0 TO 20.0 FIRST TEMP COEFFICIENT -25.0 TO 25.0 SECOND TEMP COEFFICIENT |
| AAQH |
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS |
-25.0 TO 145.0 TEMP RANGE OF FIRST TEMP COEFFICIENT -55.0 TO -25.0 TEMP RANGE OF SECOND TEMP COEFFICIENT |
| AAQZ |
INCLOSURE METHOD |
ENCAPSULATED |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AAQF |
AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER |
125.0 |
| AARB |
TERMINAL TYPE |
WIRE LEAD |
| STYL |
STYLE DESIGNATOR |
AXIAL TERMINAL EACH END |
| AAPP |
ELECTRICAL RESISTANCE |
1.210 KILOHMS |
| AEFB |
POWER DISSIPATION RATING IN WATTS |
0.0375 FREE AIR |
| AAQG |
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER |
145.0 |
| AAPQ |
RESISTANCE TOLERANCE IN PERCENT |
-0.500 TO 0.500 |
| ADAQ |
BODY LENGTH |
0.250 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
13499-748-9555-00 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) AND 13499-748-9629-00 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ABPM |
BODY DIAMETER |
0.125 INCHES NOMINAL |
