| MRC |
Requirement Statement |
Characteristics |
| ABQZ |
INTERNAL DRIVE STYLE |
W/O INTERNAL DRIVE |
| ABQJ |
POINT STYLE |
CHAMFER DOG |
| MATT |
MATERIAL |
STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| AASA |
THREAD LENGTH |
0.400 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
98752 |
| SR-5 |
DESIGN CONTROL REFERENCE |
7132475-03 |
| AATB |
WIDTH BETWEEN FLATS |
0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AAJD |
THREAD CLASS |
3A |
| SR-5 |
THE MANUFACTURERS DATA |
|
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASU |
HEAD HEIGHT |
0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CWDK |
POINT CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAVA |
POINT DIAMETER |
0.250 INCHES NOMINAL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| AASB |
FASTENER LENGTH |
0.700 INCHES NOMINAL |
| AAUY |
POINT LENGTH |
0.300 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
