| MRC |
Requirement Statement |
Characteristics |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 2 |
| AARX |
INSIDE DIAMETER |
0.735 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
MILDEW RESISTANT AND OIL RESISTANT AND OIL RESISTANT |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CRDW |
HYDROSTATIC TEST PRESSURE |
4500.0 POUNDS PER SQUARE INCH |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRXX |
MEASURING METHOD AND LENGTH |
49.375 INCHES NOMINAL OVERALL |
| ABKV |
OUTSIDE DIAMETER |
1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE 2ND LAYER BRAIDED STEEL WIRE OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H13531 GOVERNMENT SPECIFICATION |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 2 |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END UN 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2250.0 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END 12 2ND END |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND A CLASS |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END STRAIGHT 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
1.312 INCHES 1ST END 1.062 INCHES 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END 3A 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED EXTERNAL TUBE 2ND END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END FLARED 2ND END |
| CQBD |
BURST TEST PRESSURE |
9000.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
9.500 INCHES |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-H-13531 |
