| MRC |
Requirement Statement |
Characteristics |
| AEPR |
FLANGE OUTSIDE DIAMETER |
0.6250 INCHES MINIMUM AND 0.6450 INCHES MAXIMUM |
| AAZP |
(NON-CORE DATA) CHAMFER LENGTH |
0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
70400-03613-101 |
| SR-5 |
MANUFACTURERS CODE |
78286 |
| AGFF |
FLANGE WIDTH |
0.0550 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758,COND D MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ADAS |
BODY INSIDE DIAMETER |
0.3010 INCHES MINIMUM AND 0.3060 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
SOLID |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| ABHP |
OVERALL LENGTH |
1.7450 INCHES MINIMUM AND 1.7550 INCHES MAXIMUM |
| BZLX |
CORNER SHAPE |
SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE LEFT FLANGE BODY CORNER |
| ADAR |
BODY OUTSIDE DIAMETER |
0.5006 INCHES MINIMUM AND 0.5011 INCHES MAXIMUM |
| CSYT |
(NON-CORE DATA) CHAMFER ANGLE |
45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CSYM |
SURFACE FINISH |
250.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY 125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE 125.0 MICROINCHES RIGHT END SURFACE OF BODY 125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL |
