| MRC |
Requirement Statement |
Characteristics |
| AGFW |
INTERIOR FLANGE WIDTH |
0.2250 INCHES MINIMUM AND 0.2350 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-C-530,COND H FED SPEC ALL MATERIAL RESPONSES OVERALL |
| SR-5 |
MANUFACTURERS CODE |
78286 |
| ABHP |
OVERALL LENGTH |
1.0900 INCHES MINIMUM AND 1.1000 INCHES MAXIMUM |
| ADAS |
BODY INSIDE DIAMETER |
0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
70106-08007-105 |
| SR-5 |
THE MANUFACTURERS DATA |
|
| TEST |
TEST DATA DOCUMENT |
78286-70106-08007-105 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| MATT |
MATERIAL |
COPPER ALLOY 172 OR COPPER ALLOY 173 OVERALL |
| ADAR |
BODY OUTSIDE DIAMETER |
1.4380 INCHES MINIMUM AND 1.4390 INCHES MAXIMUM |
| AGFU |
INTERIOR FLANGE HOLE DIAMETER |
1.2410 INCHES MINIMUM AND 1.2430 INCHES MAXIMUM |
