| MRC |
Requirement Statement |
Characteristics |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CRSM |
VACUUM IN TORR |
76.2 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON AND FUMIGANT SINGLE RESPONSE |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJD |
THREAD CLASS |
3B 1ST END 3B 2ND END |
| ADLH |
(NON-CORE DATA) SECOND END FITTING SPEC/STD DATA |
MS87020-12 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADLF |
(NON-CORE DATA) HOSE OR TUBING SPEC/STD DATA |
MIL MS87027-12 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END SWIVEL NUT FLARE 2ND END |
| AARX |
INSIDE DIAMETER |
0.688 INCHES NOMINAL |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED, QQ-P-35 |
| ADLG |
(NON-CORE DATA) FIRST END FITTING SPEC/STD DATA |
MS87018-12 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES 1ST END 1.062 INCHES 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END ELBOW 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END UN 2ND END |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END 12 2ND END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQBD |
BURST TEST PRESSURE |
3750.0 POUNDS PER SQUARE INCH |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRXX |
MEASURING METHOD AND LENGTH |
5.750 INCHES NOMINAL WORKING |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.500 INCHES |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJP |
(NON-CORE DATA) OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| ABKV |
OUTSIDE DIAMETER |
0.938 INCHES NOMINAL |
