| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.8750 INCHES FIRST END |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |
| FEAT |
SPECIAL FEATURES |
TWO 0.109 IN. DIA HOLES 0.109 IN.DEEP 180 DEGREES APART,0.375 IN. BOLT CIRCLES DIAMETER |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| BDZQ |
BACKLASH DESIGNATION |
GRADE D |
| CWRM |
FACE NOMINAL WIDTH |
0.122 INCHES |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
2.3125 INCHES |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.0625 INCHES FIRST END |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWWN |
END NOMINAL DIAMETER |
0.5000 INCHES FIRST END |
| SR-5 |
MANUFACTURERS CODE |
50237 |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AJLA |
TEETH QUANTITY |
146 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
0.18725 INCHES BOTH ENDS |
| CWWK |
PRECISION CLASSIFICATION |
QUALITY NUMBER 10 |
| SR-5 |
DESIGN CONTROL REFERENCE |
681-2-506 |
| AGJS |
PITCH DIAMETER |
2.2812 INCHES NOMINAL |
| CWWH |
END NOMINAL LENGTH |
0.1875 INCHES FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.2500 INCHES FIRST END |
