| MRC |
Requirement Statement |
Characteristics |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 1ST END |
| CQBD |
BURST TEST PRESSURE |
14000.0 POUNDS PER SQUARE INCH |
| ADLF |
(NON-CORE DATA) HOSE OR TUBING SPEC/STD DATA |
SAE AS604,SIZE 8-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRXX |
MEASURING METHOD AND LENGTH |
24.125 INCHES NOMINAL WORKING |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| AARX |
INSIDE DIAMETER |
0.391 INCHES MINIMUM |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE 2ND LAYER SPIRALLY LAID STEEL WIRE 3RD LAYER SPIRALLY LAID STEEL WIRE OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| ABKV |
OUTSIDE DIAMETER |
0.500 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRDW |
HYDROSTATIC TEST PRESSURE |
6000.0 POUNDS PER SQUARE INCH |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
PLASTIC, TETRAFLUOROETHYLENE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81343-AS621 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 1ST END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.750 INCHES |
| AAJP |
(NON-CORE DATA) OUTSIDE SURFACE TREATMENT |
PASSIVATED |
