| MRC |
Requirement Statement |
Characteristics |
| CRXX |
MEASURING METHOD AND LENGTH |
156.000 INCHES NOMINAL WORKING |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AARX |
INSIDE DIAMETER |
0.750 INCHES NOMINAL |
| MEDA |
MEDIA FOR WHICH DESIGNED |
HYDRAULIC FLUID SINGLE RESPONSE |
| AEPR |
FLANGE OUTSIDE DIAMETER |
1.750 INCHES NOMINAL 1ST END 1.750 INCHES NOMINAL 2ND END |
| AWLS |
CONNECTION TYPE |
RECESSED FLANGE 1ST END RECESSED FLANGE 2ND END |
| ABMD |
RECESS DIAMETER |
0.812 INCHES NOMINAL 1ST END 0.812 INCHES NOMINAL 2ND END |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| ABMH |
RECESS DEPTH |
0.062 INCHES NOMINAL 1ST END 0.062 INCHES NOMINAL 2ND END |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END ELBOW 2ND END |
| ABKV |
OUTSIDE DIAMETER |
1.250 INCHES NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.438 INCHES NOMINAL 1ST END 0.438 INCHES NOMINAL 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END SOLID 2ND END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END 90.0 DEGREES 2ND END |
| AHNC |
CONNECTION STYLE |
RECESSED W/GASKET GROOVE 1ST END RECESSED W/GASKET GROOVE 2ND END |
| CTCJ |
FLANGE STYLE |
ROUND W/ OUT BOLT HOLES 1ST END ROUND W/ OUT BOLT HOLES 2ND END |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
0.0 |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, COMPOSITION |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER SPIRALLY WRAPPED STEEL FABRIC 2ND LAYER SPIRALLY WRAPPED STEEL FABRIC 3RD LAYER SPIRALLY WRAPPED STEEL FABRIC 4TH LAYER SPIRALLY WRAPPED STEEL FABRIC OUTER LAYER MOLDED RUBBER |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
