| MRC |
Requirement Statement |
Characteristics |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWFR |
NOMINAL OVERALL LENGTH |
0.312 INCHES |
| CWRS |
BORE NOMINAL DIAMETER |
0.188 INCHES BOTH ENDS |
| CWNH |
TOOTH FORM |
STANDARD |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.374 INCHES |
| AJLA |
TEETH QUANTITY |
16 |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| SR-5 |
MANUFACTURERS CODE |
55901 |
| SR-5 |
DESIGN CONTROL REFERENCE |
645-000-075 |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| AGJS |
PITCH DIAMETER |
0.3330 INCHES NOMINAL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWRM |
FACE NOMINAL WIDTH |
0.125 INCHES |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.187 INCHES FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MATT |
MATERIAL |
COPPER ALLOY 360 OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWTX |
HUB NOMINAL DIAMETER |
0.275 INCHES FIRST END |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN FIRST END |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
40 TRANSVERSELY THROUGH HUB, FIRST END |
| SFTT |
SURFACE TREATMENT |
OXIDE OVERALL |
