| MRC |
Requirement Statement |
Characteristics |
| AJLA |
TEETH QUANTITY |
40 |
| MATT |
MATERIAL |
STEEL COMP 8620 OVERALL |
| CQFM |
HARDNESS RATING |
73.1 ROCKWELL SUPERFICIAL 30-N NOMINAL BODY 73.1 ROCKWELL SUPERFICIAL 30-N NOMINAL TEETH |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWNH |
TOOTH FORM |
STANDARD |
| CWRM |
FACE NOMINAL WIDTH |
0.563 INCHES |
| CWFR |
NOMINAL OVERALL LENGTH |
0.813 INCHES |
| AGJS |
PITCH DIAMETER |
3.3333 INCHES NOMINAL |
| CWSN |
KEYWAY NOMINAL WIDTH |
0.127 INCHES BOTH ENDS |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN BOTH ENDS |
| FEAT |
SPECIAL FEATURES |
TWO HOLES 3/8-24 IN.ON A 2 IN.BOLT CIRCLE 180 DEG APART THROUGH REINFORCED PORTION OF WEB |
| STYL |
STYLE DESIGNATOR |
ONE PROTRUDING HUB, ONE FLUSH HUB |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.250 INCHES FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
3.498 INCHES |
| CWTX |
HUB NOMINAL DIAMETER |
1.375 INCHES FIRST END 1.375 INCHES SECOND END |
| AAQL |
BODY STYLE |
WEBBED, SOLID |
| CWRS |
BORE NOMINAL DIAMETER |
0.875 INCHES BOTH ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 AISI/SAE 8620 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| CWSR |
NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM |
0.504 INCHES BOTH ENDS |
