| MRC |
Requirement Statement |
Characteristics |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
2 PLAIN AXIALLY THROUGH BODY, FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AGJS |
PITCH DIAMETER |
1.1250 INCHES NOMINAL |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWWH |
END NOMINAL LENGTH |
0.110 INCHES FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
0.560 INCHES SECOND END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.080 INCHES FIRST END |
| CWNH |
TOOTH FORM |
STANDARD |
| CWZK |
MOUNTING HOLE NOMINAL DIAMETER |
0.110 INCHES AXIALLY THROUGH HUB, FIRST END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.560 INCHES FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.095 INCHES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| FEAT |
SPECIAL FEATURES |
FIRST END HUB STYLE NO. 4 |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWWN |
END NOMINAL DIAMETER |
0.250 INCHES FIRST END |
| AJLA |
TEETH QUANTITY |
54 |
| SR-5 |
DESIGN CONTROL REFERENCE |
1225949-6 |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.113 INCHES SECOND END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| SR-5 |
MANUFACTURERS CODE |
10001 |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.167 INCHES |
| CWFR |
NOMINAL OVERALL LENGTH |
0.398 INCHES |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 OVERALL |
| CWRS |
BORE NOMINAL DIAMETER |
0.187 INCHES BOTH ENDS |
| CWZN |
BOLT HOLE CIRCLE NOMINAL DIAMETER |
0.375 INCHES AXIALLY THROUGH HUB, FIRST END |
