| MRC |
Requirement Statement |
Characteristics |
| AXFG |
SPLINE PRESSURE ANGLE IN DEG |
30.0 |
| AZFH |
HOUSING SURFACE TREATMENT |
ANODIZED |
| AXFP |
DISPLACEMENT TYPE |
CONSTANT |
| AXFC |
CONNECTION DESIGN |
THREADED |
| AFFL |
MOUNTING BOLT CIRCLE DIAMETER |
1.499 INCHES NOMINAL |
| ABUJ |
THREAD SIZE |
0.438-20 |
| AGJS |
PITCH DIAMETER |
0.4583 INCHES NOMINAL |
| AJAB |
DRIVE SHAFT TYPE |
SPLINED, INVOLUTE EXTERNAL |
| AAUJ |
SPLINE MAJOR DIAMETER |
0.5000 INCHES NOMINAL |
| AXFH |
SPLINE LENGTH |
0.530 INCHES NOMINAL |
| AJLF |
HOUSING MATERIAL |
ALUMINUM ALLOY |
| AXFN |
MOUNTING GOVERNMENT STANDARD |
AND 10260 |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNF |
| ABTB |
MOUNTING HOLE DIAMETER |
0.281 INCHES NOMINAL |
| AAXX |
MOUNTING TYPE |
FLANGE |
| APJC |
THREAD LOCATION |
INTERNAL |
| AXFB |
MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE |
2750 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAUH |
SPLINE MINOR DIAMETER |
0.4043 INCHES NOMINAL |
| ASMM |
CONNECTION QUANTITY |
1 |
| AEQC |
OPERATING SPEED AT RATED CAPACITY IN RPM |
7200.0 |
| AKCT |
SHAFT ROTATION DIRECTION |
COUNTERCLOCKWISE |
| AAPL |
TORQUE LOAD RATING |
45.5 PORM 570 INCH-POUNDS |
| ABTJ |
MOUNTING HOLE QUANTITY |
4 |
| ZZZV |
III FSC APPLICATION DATA |
HYDRAULIC SYSTEM,AIRCRAFT |
| ASAP |
SPLINE PITCH |
24/48 |
| AWLS |
CONNECTION TYPE |
DRAIN |
| AZFE |
CONNECTION GOVERNMENT SPEC/STD |
AND 10050-4 AND AND 10050-6 |
| AXFQ |
CONSTANT DISPLACEMENT PER REVOLUTION |
115.000 CUBIC INCHES |
| ABSA |
SPLINE QUANTITY |
11 |
