| MRC |
Requirement Statement |
Characteristics |
| AAWM |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIFTH DIAMETER |
0.179 INCHES NOMINAL |
| AAWF |
FOURTH DIAMETER FROM HEAD |
0.472 INCHES NOMINAL |
| CRRP |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SEVENTH DIAMETER |
0.285 INCHES NOMINAL |
| CTSS |
SEVENTH DIAMETER FROM HEAD |
0.402 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNS |
| AASA |
THREAD LENGTH |
0.380 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS6302 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASY |
DISTANCE FROM CENTERLINE TO FLAT |
0.059 INCHES NOMINAL |
| AAWE |
THIRD DIAMETER FROM HEAD |
0.402 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.472 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3A |
| AAWL |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER |
0.118 INCHES NOMINAL |
| AASU |
HEAD HEIGHT |
0.200 INCHES NOMINAL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.469 INCHES |
| MATT |
MATERIAL |
STEEL OVERALL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.402 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DEE CHAMFER |
| AASB |
FASTENER LENGTH |
0.343 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| CTCC |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SIXTH DIAMETER |
0.246 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CWAF |
SIXTH DIAMETER FROM HEAD |
0.472 INCHES NOMINAL |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
7 |
| AAWG |
FIFTH DIAMETER FROM HEAD |
0.402 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.160 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| AASL |
HEAD DIAMETER |
0.705 INCHES MINIMUM AND 0.709 INCHES MAXIMUM |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.430 INCHES NOMINAL |
