| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 006450 | UNIFLITE INC | 15823 | C | 1 | 5 | N | |||
| 022514PCP6 | UNIFLITE INC | 15823 | C | 1 | 5 | N | |||
| 026689-0 | UNIFLITE INC | 15823 | 5 | 9 | 5 | ||||
| 026689-0 | SEA CURE TECHNOLOGY INC | 67060 | 3 | 2 | 5 | ||||
| 055803-1 | UNIFLITE INC | 15823 | C | 1 | 5 | N | |||
| 50SK1 | UNIFLITE INC | 15823 | C | 1 | 5 | N | |||
| 5500-200-1PCF22 | HARBOR BOAT BUILDING CO | 27222 | C | 1 | 5 | N | |||
| 6704M1PCP6 | UNIFLITE INC | 15823 | C | 1 | 5 | N | |||
| M1081 | YORK ELECTRIC AND MACHINE CO | 66944 | C | 1 | 5 | N | |||
| M1088 | YORK ELECTRIC AND MACHINE CO | 66944 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| ABRR | KEYWAY WIDTH | 0.500 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | FOR 60 FT BOMB TARGET BOAT |
| ABKV | OUTSIDE DIAMETER | 2.000 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 14.709 FEET NOMINAL |
| ARQS | CONSTRUCTION | SOLID |
| ABND | TAPER LENGTH | 0.479 FEET NOMINAL |
| CPTC | AFTER END DESIGN | TAPERED |
| CPNF | THREADED FORWARD END | NOT INCLUDED |
| ABRV | KEYWAY DEPTH | 0.250 INCHES NOMINAL |
| CPHX | FORWARD END DIAMETER | 2.000 INCHES NOMINAL |
| ABGL | WIDTH | 0.500 INCHES NOMINAL |
| CPJG | AFTER END KEYWAY | PROVIDED |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| CPTD | THREADED AFTER END | INCLUDED |
| ABET | THREAD LENGTH | 2.438 INCHES |
| AEVE | KEYWAY QUANTITY | 1 |
| AAZR | MAJOR DIAMETER | 1.642 INCHES NOMINAL |
| AKYN | FURNISHED ITEMS AND QUANTITY | PROPELLER NUT,1; PROPELLER JAM NUT,1; PROPELLER KEY,1; PROPELLER COTTER PIN,1; COUPLING KEY,1 |
| NMBR | QUANTITY | 1 |
| BPJZ | USAGE LOCATION | CENTER |
| ABQB | TAPER MAJOR DIAMETER | 2.000 INCHES NOMINAL |
| CPJF | FORWARD END KEYWAY | PROVIDED |
| CTKF | TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
| MATL | MATERIAL | BRASS,MIL-B-994A COMP A,COLD DRAWN AND EXTRUDED |
| CPHM | FORWARD END DESIGN | STRAIGHT |
| APQB | UNIT TYPE | PROPELLER SHAFT SECTION |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | SAE,MARINE PROPELLER,SHAFT ENDS AND HUBS AS MODIFIED BY OVERALL LENGTH |
| AZRW | THREAD QUANTITY | 6 PER INCH |
| AEJZ | DEPTH | 0.250 INCHES NOMINAL |
