| MRC |
Requirement Statement |
Characteristics |
| CCSR |
STEM SOCKET DIAMETER |
0.375 INCHES NOMINAL |
| CCBH |
TREAD WIDTH |
0.781 INCHES NOMINAL |
| ANNR |
SURFACE TREATMENT AND LOCATION |
NICKEL BODY |
| CBZR |
STEM SOCKET STYLE |
GRIPNECK-OPEN TYPE |
| CCBC |
SWIVEL BEARING ARRANGEMENT |
TWO LEVEL |
| ALYX |
STEM STYLE |
GRIPNECK |
| STYL |
STYLE DESIGNATOR |
SWIVEL OFFSET |
| ZZZW |
DEPARTURE FROM CITED DOCUMENT |
AS MODIFIED BY SURFACE TREATMENT |
| AGDH |
WHEEL QUANTITY |
1 |
| AYMR |
WHEEL TYPE |
BUILT UP |
| ANNQ |
MATERIAL AND LOCATION |
RUBBER, SOFT TREAD RUBBER, HARD WHEEL RIM STEEL BODY |
| FEAT |
SPECIAL FEATURES |
NONSTAINING, NONMARKING CUSHION TREADS, PERMANENTLY BONDED, IMPACT RESISTANT, HARD RUBBER COMPOSITION CORE; WHEELS TREAD THICKNESS 3/16IN.; WHEEL TREAD AND CORE MATERIAL HARDNESS RANGE HARD RUBBER 75-85 SHORE D, SOFT RUBBER 70-85 SHORE A; TENSILE 1500 PSI MIN., ADHESION BETWEEN TREAD AND CORE IS 50 LBS PER INCH OF WIDTH; AXLES AND STEMS - COLD DRAWN STEEL; NUT AND BOLT COMBINATION OR SOLID RIVET TYPE AND PERMANENTLY FASTENED; BALL BEARINGS - CORROSION RESISTANT, CASE HARDENED GROUND STEEL; ASSEMBLY WITH A WATER REPELLENT GREASE |
| CCBB |
SWIVEL BEARING TYPE |
BALL |
| ALZE |
STEM DIAMETER |
0.375 INCHES NOMINAL |
| ALSC |
SAFE OPERATING LOAD RATING |
NOT RATED |
| CBZZ |
WHEEL BEARING TYPE |
PLAIN, SELF-LUBRICATED |
| BRHQ |
EFFECTIVE HEIGHT |
3.000 INCHES NOMINAL |
| BCDX |
WHEEL DIAMETER |
2.000 INCHES NOMINAL |
| CCSQ |
STEM SOCKET DEPTH |
1.500 INCHES NOMINAL |
| ALZD |
STEM LENGTH |
1.438 INCHES NOMINAL |
