| MRC |
Requirement Statement |
Characteristics |
| SR-5 |
DESIGN CONTROL REFERENCE |
5339-042232-3 |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CWRS |
BORE NOMINAL DIAMETER |
0.250 INCHES BOTH ENDS |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWNH |
TOOTH FORM |
STANDARD |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| SR-5 |
MANUFACTURERS CODE |
97384 |
| CWTX |
HUB NOMINAL DIAMETER |
0.406 INCHES FIRST END |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.541 INCHES |
| AGJS |
PITCH DIAMETER |
0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWRM |
FACE NOMINAL WIDTH |
0.187 INCHES |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| CWFR |
NOMINAL OVERALL LENGTH |
0.437 INCHES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.250 INCHES FIRST END |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN FIRST END |
| AJLA |
TEETH QUANTITY |
24 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
32 TRANSVERSELY THROUGH HUB, FIRST END |
