| MRC |
Requirement Statement |
Characteristics |
| MATT |
MATERIAL |
COPPER ALLOY 932 OVERALL |
| CSYT |
(NON-CORE DATA) CHAMFER ANGLE |
15.0 DEGREES NOMINAL 30.0 DEGREES NOMINAL |
| AGFF |
FLANGE WIDTH |
0.1680 INCHES MINIMUM AND 0.1730 INCHES MAXIMUM |
| ADAS |
BODY INSIDE DIAMETER |
1.5300 INCHES MINIMUM AND 1.5400 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.2480 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM FIRST |
| ABHP |
OVERALL LENGTH |
1.4980 INCHES MINIMUM AND 1.5030 INCHES MAXIMUM |
| ADAR |
BODY OUTSIDE DIAMETER |
1.8145 INCHES MINIMUM AND 1.8150 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
516837 |
| SR-5 |
MANUFACTURERS CODE |
02978 |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CTJM |
ANTIROTATION/LUBRICATION TYPE AND QUANTITY |
1 HOLE |
| STYL |
STYLE DESIGNATOR |
SOLID |
| BZLX |
CORNER SHAPE |
SQUARE OUTSIDE LEFT CORNER CHAMFERED OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE LEFT FLANGE BODY CORNER |
| ADZG |
LUBRICATION MATERIAL |
LUBRICATING OIL |
| AAZP |
(NON-CORE DATA) CHAMFER LENGTH |
0.0500 INCHES NOMINAL 0.0660 INCHES NOMINAL |
| CTMQ |
SURFACE GROOVE LOCATION AND QUANTITY |
2 INTERNAL |
| AEPR |
FLANGE OUTSIDE DIAMETER |
2.1150 INCHES MINIMUM AND 2.1250 INCHES MAXIMUM |
| AGKH |
LUBRICANT ACCOMMODATION STYLE |
GROOVED CLOSED BOTH ENDS |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY 63.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE 32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE 63.0 MICROINCHES RIGHT END SURFACE OF BODY 32.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE |
