| MRC |
Requirement Statement |
Characteristics |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
0.750 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-7179 MIL SPEC SINGLE TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| ADUM |
OVERALL THICKNESS |
0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.356 INCHES MINIMUM AND 0.366 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
3.280 INCHES NOMINAL |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.640 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
2 HOLES ARE .750 TO 1.000 FROM CENTER HOLE, AND BOTH ENDS ARE CUT OFF FROM CENTER OF END HOLES AFTER 0.38 +0 -.03 |
| AECS |
BOLT HOLE QUANTITY |
3 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5 T3 FED SPEC SINGLE MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/SQUARE CORNERS |
| ADVJ |
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE |
0.243 INCHES MINIMUM AND 0.258 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.486 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
