| MRC |
Requirement Statement |
Characteristics |
| AHLF |
SECOND LEG WIDTH |
1.060 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| ADLK |
FIRST LEG LENGTH |
0.089 INCHES MINIMUM AND 0.091 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| AHLG |
SECOND LEG CORNER RADIUS |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| FEAT |
SPECIAL FEATURES |
INCL 3 NUT,ANCHOR AND 4 RIVETS |
| ADLL |
SECOND LEG LENGTH |
0.091 INCHES MINIMUM AND 0.093 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.255 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.070 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
4071T63G01 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5599 ASSN STD SINGLE MATERIAL RESPONSE |
| AHQP |
FIRST LEG CORNER RADIUS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.560 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
99207 |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
