| MRC |
Requirement Statement |
Characteristics |
| BZRR |
THREAD SERIES |
UNF |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.453 INCHES NOMINAL |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
9.026 INCHES MINIMUM AND 9.036 INCHES MAXIMUM |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE OR POSITIVE |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| ELEC |
VOLTAGE IN VOLTS |
12.0 |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
193.0 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
50.0 |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
159.0 |
| AKAE |
MAXIMUM OPERATING ALTITUDE RATING |
NOT RATED |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
1925 |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.875 INCHES NOMINAL |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| ABPT |
SECOND STEP DIAMETER |
0.874 INCHES MINIMUM AND 0.8745 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT AND FUNGUS RESISTANT |
| BCGN |
GROUNDING METHOD |
EXTERNAL |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| ABFF |
FURNISHED ITEMS |
WOODRUFF KEY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
1.453 INCHES NOMINAL |
| AFYS |
KEYWAY LENGTH |
0.750 INCHES NOMINAL |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.375 INCHES NOMINAL |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| SR-5 |
DESIGN CONTROL REFERENCE |
1106835 |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| ZZZV |
III FSC APPLICATION DATA |
ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
3.875 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.844 INCHES NOMINAL |
| ABVA |
UNTHREADED PORTION LENGTH |
1.312 INCHES NOMINAL |
| ABRR |
KEYWAY WIDTH |
0.156 INCHES NOMINAL |
| AWDP |
THREAD DIAMETER |
0.625 INCHES NOMINAL |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
NOT RATED |
| SR-5 |
MANUFACTURERS CODE |
1LW55 |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
16 |
| CFHL |
THREAD CLASS |
2A |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
10.151 INCHES MINIMUM AND 10.161 INCHES MAXIMUM |
