| MRC |
Requirement Statement |
Characteristics |
| AGFF |
FLANGE WIDTH |
0.0490 INCHES MINIMUM AND 0.0510 INCHES MAXIMUM |
| AEPR |
FLANGE OUTSIDE DIAMETER |
1.0850 INCHES MINIMUM AND 1.0950 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| ADAS |
BODY INSIDE DIAMETER |
0.5000 INCHES MINIMUM AND 0.5002 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
16.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY 63.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE 63.0 MICROINCHES RIGHT END SURFACE OF BODY 63.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUB |
HOLE DIAMETER |
0.1370 INCHES MINIMUM AND 0.1430 INCHES MAXIMUM FIRST |
| AGFJ |
RIGHT INTERNAL FLANGE HOLE DIAMETER |
0.4320 INCHES MINIMUM AND 0.4420 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
3329217 |
| ABHP |
OVERALL LENGTH |
0.2750 INCHES MINIMUM AND 0.2770 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ADAR |
BODY OUTSIDE DIAMETER |
0.6247 INCHES MINIMUM AND 0.6249 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
82577 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL |
STYLE DESIGNATOR |
SOLID INTERNAL FLANGE ONE END |
| AAZP |
(NON-CORE DATA) CHAMFER LENGTH |
0.0420 INCHES MINIMUM AND 0.0470 INCHES MAXIMUM |
| BZLX |
CORNER SHAPE |
SQUARE OUTSIDE LEFT CORNER CHAMFERED OUTSIDE RIGHT CORNER UNDERCUT INSIDE RIGHT CORNER SQUARE INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER |
| MATT |
MATERIAL |
STEEL COMP 630 OVERALL |
| CTJM |
ANTIROTATION/LUBRICATION TYPE AND QUANTITY |
3 HOLE |
| CSYT |
(NON-CORE DATA) CHAMFER ANGLE |
30.0 DEGREES NOMINAL |
| AGFL |
RIGHT INTERNAL FLANGE WIDTH |
0.0310 INCHES NOMINAL |
