| MRC |
Requirement Statement |
Characteristics |
| AGYE |
SURFACE FINISH |
GROUND |
| MATT |
MATERIAL |
STEEL BALL STEEL INNER RING STEEL OUTER RING PLASTIC POLYAMIDE RETAINER RUBBER SYNTHETIC SEAL |
| ABXV |
BORE DIAMETER |
0.5000 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM |
| AGVV |
OUTER RING OUTSIDE DIAMETER |
1.1250 INCHES MINIMUM AND 1.1300 INCHES MAXIMUM |
| AEPR |
FLANGE OUTSIDE DIAMETER |
1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| AGZD |
BORE SHAPE |
STRAIGHT |
| AGVT |
OUTER RING WIDTH |
0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM |
| AGFF |
FLANGE WIDTH |
0.0625 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
ONE-PIECE INNER OR OUTER RING,ONE FACE OF BOTH RINGS FLUSH,INNER RING EXTENDS ON FLANGE SIDE,SEAL LOCATED FLANGE SIDE,BEARING FINISHED WITH A BLACK OXIDE COATING,BEARING GROUND ON OD ONLY,OTHER SURFACES UNGROUND |
| AGZH |
INTERNAL FIT-UP DESIGNATION |
STANDARD |
| AGVU |
INNER RING WIDTH |
0.4275 INCHES MINIMUM AND 0.4475 INCHES MAXIMUM |
| AGYW |
BEARING SEAL TYPE |
CONTACT |
| AGYF |
RETAINER FABRICATION METHOD |
MOLDED |
| AGYJ |
SEAL QUANTITY |
1 |
| AGZC |
LOAD DIRECTION |
RADIAL |
