| MRC |
Requirement Statement |
Characteristics |
| ABPM |
BODY DIAMETER |
0.875 INCHES NOMINAL |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| AEDX |
SHAFT STYLE |
ROUND |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
2 |
| ABHP |
III OVERALL LENGTH |
3.896 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
3.021 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.5 FREE AIR ALL SECTIONS |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.04 TO 0.04 1ST SECTION -0.25 TO 0.25 2ND SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| ABPA |
UNDERCUT DIAMETER |
0.625 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
50.0 ALL SECTIONS |
| APXH |
TERMINAL LOCATION |
LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| TEST |
TEST DATA DOCUMENT |
06003-290-222-522 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ABXF |
SHAFT LENGTH |
0.875 INCHES NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.50 INCH-OUNCES |
| AECZ |
MOUNTING LIP DIAMETER |
0.8750 INCHES NOMINAL |
| ADAV |
III OVERALL DIAMETER |
1.125 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0680 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.0 KILOHMS ALL SECTIONS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 NOMINAL |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0 TO 3.0 ALL SECTIONS |
| AEFK |
MAXIMUM STARTING TORQUE |
0.70 INCH-OUNCES |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 NOMINAL |
| AEFM |
MAXIMUM STOP TORQUE |
100.00 INCH-OUNCES |
| AAVL |
PILOT DIAMETER |
0.6250 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
105.0 ALL SECTIONS |
