| MRC |
Requirement Statement |
Characteristics |
| AKNA |
INCLOSURE TYPE |
ENCASED |
| ADAQ |
BODY LENGTH |
0.734 INCHES MAXIMUM |
| AHAS |
LOAD IMPEDANCE PER FUNCTION |
100.0 KILOHMS BLANK |
| AKEJ |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR |
UNC |
| ADAU |
BODY HEIGHT |
1.406 INCHES MAXIMUM |
| AHAQ |
SOURCE IMPEDANCE RATING PER FUNCTION |
100.0 KILOHMS BLANK |
| CRBB |
FREQUENCY BAND WIDTH PER FUNCTION |
20.35 KILOHERTZ BLANK AND 23.65 KILOHERTZ BLANK |
| CQDR |
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS |
3.0 BLANK |
| CQJX |
NOMINAL THREAD SIZE |
0.112 INCHES |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| ADAT |
BODY WIDTH |
0.734 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
1.781 INCHES MAXIMUM |
| CQDZ |
III MAXIMUM DIELECTRIC WITHSTANDING AC RMS VOLTAGE |
500.0 VOLTS AT SEA LEVEL |
| AFGA |
III OPERATING TEMP RANGE |
0.0 TO 50.0 DEG CELSIUS |
| CRBC |
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS |
40.0 MINIMUM BLANK AND 3.0 MAXIMUM BLANK AND 3.0 MAXIMUM BLANK AND 40.0 MINIMUM BLANK |
| CQFC |
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION |
12.54 KILOHERTZ BLANK AND 20.35 KILOHERTZ BLANK AND 23.65 KILOHERTZ BLANK AND 38.50 KILOHERTZ BLANK |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
0.562 INCHES NOMINAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 THREADED STUD |
| AHAJ |
REFERENCE FREQUENCY PER FUNCTION |
22.0 KILOHERTZ BLANK |
| AHBL |
III PRINCIPAL CIRCUITRY TYPE PER FUNCTION |
INDUCTANCE-CAPACITANCE BLANK |
| CQDW |
FUNCTIONAL TERMINAL TYPE AND QUANTITY |
1 TAB, SOLDER LUG INPUT 1ST FUNCTION 1 TAB, SOLDER LUG OUTPUT 2ND FUNCTION 1 TAB, SOLDER LUG GROUND 3RD FUNCTION |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.562 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
10001-2641158 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
