| MRC |
Requirement Statement |
Characteristics |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A-295 ASSN STD SINGLE MATERIAL RESPONSE BALL ASTM A-295 ASSN STD SINGLE MATERIAL RESPONSE INNER RING ASTM A-295 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING 225914,62983 MFR REF SINGLE MATERIAL RESPONSE RETAINER |
| AGYE |
SURFACE FINISH |
GROUND |
| STYL |
STYLE DESIGNATOR |
NON-LOADING GROOVE, NON-SEPARABLE |
| AKVV |
INTERNAL CLEARANCE |
0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| ABXV |
BORE DIAMETER |
2.3120 INCHES MINIMUM AND 2.3125 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
62983 |
| AGZD |
BORE SHAPE |
STRAIGHT |
| FEAT |
SPECIAL FEATURES |
STABILIZED FOR OPERATION AT 350 DEG F,RING FACES PERPENDICULAR TO ID AND OD WITHIN 0.0003 IN. AND PARALLEL TO EACH OTHER WITHIN 0.0003 IN. TIR,INNER RING RACEWAY CONCENTRIC TO ID WITHIN 0.0005 IN. TIR,OUTER RING RACEWAY CONCENTRIC TO OD WITHIN 0.0004 IN. TIR,MAX SURFACE FINISH,ID INNER RING 20 MICROINCHES AA,OUTER RING 15 MICROINCHES AA,LIP INNER RING 20 MICROINCHES AA,LIP OUTER RING 25 MICROINCHES AA,RING FACES 20 MICROINCHES AA,BALLS 10 MICROINCHES AA,MAX BALL DIA VARIATION IN ANY ONE BEARING 0.000020 IN.,OUTER RING FRACTURED,RETAINED BY 2 HOLDING RINGS,C SCALE 59.0 MIN ROCKWELL HARDNESS RINGS AND BALLS |
| SR-5 |
THE MANUFACTURERS DATA |
|
| MATT |
MATERIAL |
STEEL BALL STEEL INNER RING STEEL OUTER RING COPPER ALLOY RETAINER |
| ADGA |
OVERALL OUTSIDE DIAMETER |
2.8746 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM |
| AGVT |
OUTER RING WIDTH |
0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AGVU |
INNER RING WIDTH |
0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM |
| AGYF |
RETAINER FABRICATION METHOD |
MACHINED |
| AGZC |
LOAD DIRECTION |
RADIAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
225914 |
