| MRC |
Requirement Statement |
Characteristics |
| THSD |
THREAD SERIES DESIGNATOR |
UNC SCREW HOLE |
| ABSR |
(NON-CORE DATA) POINTER OVERALL LENGTH |
0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
KNOB MTD ON CRES EXTENION SHAFT,0.250 IN. NOM DIA BY 3.060 IN. NOM LG.END OPPOSITE KNOB HAS 1/4-28 UNF CLASS3A THD AND ONE 0.092 IN. MIN,0.097 IN.MAX DIA HOLE LOCATED 0.180 IN. FROM END,MIDDLE OF EXTENSION SHAFT IS FLATTED WITH TWO THD HOLES,4-40 NC CLASS 2B |
| CBSC |
SCREW DRIVE TYPE |
HEXAGON SOCKET |
| ABSS |
(NON-CORE DATA) DISTANCE TO POINTER END |
0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| ADUM |
OVERALL THICKNESS |
0.703 INCHES MINIMUM AND 0.735 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
209-070-477-3 |
| CMLP |
THREAD QUANTITY PER INCH |
32 SCREW HOLE |
| ABHG |
GRIPPING SURFACE CONDITION |
GRIP AID |
| ABSX |
ATTACHMENT METHOD |
SETSCREWS |
| ABFR |
SETSCREW HOLE QUANTITY |
1 |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ABSP |
REFERENCE MARKING |
ARROW |
| ADJT |
INSIDE WIDTH |
0.222 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ROUND WITH SINGLE POINTED BAR FACE |
| ABFU |
DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE |
0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| ABKV |
OUTSIDE DIAMETER |
1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM |
| ABSW |
(NON-CORE DATA) SURFACE LUSTER |
MATTE |
| ABFY |
OVERALL DEPTH |
0.531 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
0.164 INCHES SCREW HOLE |
| AARX |
INSIDE DIAMETER |
0.252 INCHES MINIMUM AND 0.254 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
97499 |
| ABHH |
SHAFT ACCOMMODATION STYLE |
FLATTED ONE SIDE |
| CSKT |
POINTER DESIGN |
NONDETACHABLE |
| MATT |
MATERIAL |
PLASTIC |
