| MRC |
Requirement Statement |
Characteristics |
| SR-5 |
DESIGN CONTROL REFERENCE |
206-001-188-001 |
| ANKF |
SEAL LOCATION |
BOTH ENDS |
| AKRF |
SEAL TYPE |
CONTACT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES BALL AMS 5659 ASSN STD SINGLE MATERIAL RESPONSE HOUSING 66 FED STD SINGLE MATERIAL RESPONSE INNER RACE 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING AMS 3652 ASSN STD 1ST MATERIAL RESPONSE OR AMS 3666 ASSN STD 2ND MATERIAL RESPONSE SEAL |
| AGZA |
ALIGNMENT TYPE |
RIGID |
| ANKK |
LOAD CAPABILITY TYPE |
RADIAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM INNER RACE CADMIUM OUTER RING |
| LBMA |
LUBRICATION MATERIAL |
GREASE |
| AMCL |
BLOCK TYPE |
FIXED |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| ANJS |
SHAFT END TYPE |
OPEN |
| FEAT |
SPECIAL FEATURES |
2ND MTG HOLE 15/16-24UNF 3B |
| ADFX |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH |
1.055 INCHES MINIMUM AND 1.057 INCHES MAXIMUM |
| ABXV |
BORE DIAMETER |
0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AFWC |
HOUSING HEIGHT |
2.335 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP E51100 OR STEEL COMP E52100 BALL STEEL COMP XM-12 HOUSING STEEL COMP E52100 INNER RACE STEEL COMP E52100 OUTER RING STEEL CORROSION RESISTING AND PLASTIC POLYTETRAFLUOROETHYLENE OR STEEL CORROSION RESISTING AND GLASS FIBER AND PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RACE QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| ANKP |
HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE |
1.830 INCHES NOMINAL |
| AGZH |
INTERNAL FIT-UP DESIGNATION |
LOOSE |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| ADGA |
OVERALL OUTSIDE DIAMETER |
2.075 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
97499 |
| CWGY |
ROTATING ELEMENT LOCKING METHOD |
STRAIGHT SLEEVE |
| CWJW |
MOUNTING HOLE TYPE |
ROUND, THREADED |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
