| MRC |
Requirement Statement |
Characteristics |
| CWJW |
MOUNTING HOLE TYPE |
ROUND, UNTHREADED |
| ANKF |
SEAL LOCATION |
BOTH ENDS |
| AKRF |
SEAL TYPE |
CONTACT |
| AGZA |
ALIGNMENT TYPE |
RIGID |
| FEAT |
SPECIAL FEATURES |
2ND MTG HOLE 0.312 IN. DIA MI TO 0.313 IN. DIA MAX |
| ANKK |
LOAD CAPABILITY TYPE |
RADIAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM INNER RACE CADMIUM OUTER RING |
| LBMA |
LUBRICATION MATERIAL |
GREASE |
| AMCL |
BLOCK TYPE |
FIXED |
| ANJS |
SHAFT END TYPE |
OPEN |
| ADFX |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH |
1.055 INCHES MINIMUM AND 1.057 INCHES MAXIMUM |
| ABXV |
BORE DIAMETER |
0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AFWC |
HOUSING HEIGHT |
2.335 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE ALIGNING RING 66 FED STD ALL MATERIAL RESPONSES BALL QQ-A-367,T6 FED SPEC SINGLE MATERIAL RESPONSE HOUSING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING AMS 3652 ASSN STD 1ST MATERIAL RESPONSE OR AMS 3666 ASSN STD 2ND MATERIAL RESPONSE SEAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RACE QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| ANKP |
HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE |
1.830 INCHES NOMINAL |
| ABTB |
MOUNTING HOLE DIAMETER |
0.2495 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM |
| AGZH |
INTERNAL FIT-UP DESIGNATION |
LOOSE |
| MATT |
MATERIAL |
STEEL COMP E51100 OR STEEL COMP E52100 BALL ALUMINUM ALLOY 2014 HOUSING STEEL COMP E52100 INNER RACE STEEL COMP E52100 OUTER RING STEEL CORROSION RESISTING AND PLASTIC POLYTETRAFLUOROETHYLENE OR STEEL CORROSION RESISTING AND GLASS FIBER AND PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| ADGA |
OVERALL OUTSIDE DIAMETER |
2.075 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
97499 |
| CWGY |
ROTATING ELEMENT LOCKING METHOD |
STRAIGHT SLEEVE |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| SR-5 |
DESIGN CONTROL REFERENCE |
206-001-185-1 |
