| MRC |
Requirement Statement |
Characteristics |
| ABHP |
OVERALL LENGTH |
2.3300 INCHES MINIMUM AND 2.3900 INCHES MAXIMUM |
| AEPR |
FLANGE OUTSIDE DIAMETER |
1.3550 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM |
| ADAS |
BODY INSIDE DIAMETER |
0.5300 INCHES MINIMUM AND 0.5390 INCHES MAXIMUM |
| ADAR |
BODY OUTSIDE DIAMETER |
0.9983 INCHES MINIMUM AND 0.9994 INCHES MAXIMUM |
| ABGG |
(NON-CORE DATA) RADIUS |
0.0300 INCHES MINIMUM AND 0.0500 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY 125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE 32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE 125.0 MICROINCHES RIGHT END SURFACE OF BODY 32.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE |
| MATT |
MATERIAL |
STEEL OVERALL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| BZLX |
CORNER SHAPE |
CHAMFERED OUTSIDE LEFT CORNER CHAMFERED OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER ROUND LEFT FLANGE BODY CORNER |
| STYL |
STYLE DESIGNATOR |
SOLID |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| SR-5 |
DESIGN CONTROL REFERENCE |
204-011-135-3 |
| CSYT |
(NON-CORE DATA) CHAMFER ANGLE |
45.0 DEGREES NOMINAL 15.0 DEGREES NOMINAL 15.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 COMP 4340 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SR-5 |
MANUFACTURERS CODE |
97499 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-8837,TYPE 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AGFF |
FLANGE WIDTH |
0.1900 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM |
| AAZP |
(NON-CORE DATA) CHAMFER LENGTH |
0.0500 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM 0.0700 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM 0.0400 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM |
