| MRC |
Requirement Statement |
Characteristics |
| CWXM |
EYE OUTSIDE WIDTH |
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AAUA |
EYE STOCK THICKNESS |
0.372 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| FEAT |
SPECIAL FEATURES |
SHANK IS UNDERCUT AT EYE 0.145 IN. MIN,0.165 IN. MAX W,0.285 IN. MIN,0.288 IN. MAX DIA,EYE IS DRILLED THROUGH LONG CROSS SECT.,0.094 IN. MIN,0.097 IN. MAX |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| AASA |
THREAD LENGTH |
0.835 INCHES MINIMUM AND 0.855 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| MATT |
MATERIAL |
STEEL OVERALL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| SR-5 |
DESIGN CONTROL REFERENCE |
204-001-768-1 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AATR |
SHANK LENGTH |
1.390 INCHES MINIMUM AND 1.420 INCHES MAXIMUM |
| CRHT |
DISTANCE FROM CENTER OF EYE TO SHANK END |
1.250 INCHES NOMINAL |
| AATK |
EYE INSIDE DIAMETER |
0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626,PHYSICAL COND C,SURFACE COND 4 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758,PHYSICAL COND C,SURFACE COND 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SR-5 |
MANUFACTURERS CODE |
97499 |
| CQBC |
MINIMUM TENSILE STRENGTH |
150000 POUNDS PER SQUARE INCH |
