| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 1770779-160 | NAVAIR AND NAVSEA MANAGED | 10001 | 3 | 2 | 2 | ||||
| 1770779-65 TO 160 | NAVAIR AND NAVSEA MANAGED | 10001 | D | 9 | 2 | ||||
| 93-025-160 | LOCKHEED MARTIN CORPORATION | 56232 | 5 | 2 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWRS | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.530 INCHES |
| CWWH | END NOMINAL LENGTH | 0.405 INCHES FIRST END |
| CWNH | TOOTH FORM | STANDARD |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.435 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.095 INCHES |
| AGJS | PITCH DIAMETER | 2.4990 INCHES MINIMUM AND 2.5000 INCHES MAXIMUM |
| AAQL | BODY STYLE | PLAIN, SOLID |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| AJLA | TEETH QUANTITY | 160 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.310 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.035 INCHES FIRST END |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| CWWN | END NOMINAL DIAMETER | 0.313 INCHES FIRST END |
