| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 171B823 | GENERAL ELECTRIC CO | 24446 | 5 | 2 | 6 | ||||
| 520798 | NAVAIR AND NAVSEA MANAGED | 10001 | 3 | 2 | 6 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | 0.655 INCHES |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWNH | TOOTH FORM | STANDARD |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| AJLA | TEETH QUANTITY | 25 |
| FEAT | SPECIAL FEATURES | COUNTERBORE 1ST END,0.125 IN. DP,0.890 IN. DIA |
| SR-5 | THE MANUFACTURERS DATA | |
| AAQL | BODY STYLE | PLAIN, SOLID |
| MATT | MATERIAL | STEEL COMP 4142 OVERALL |
| CQFM | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CWRS | BORE NOMINAL DIAMETER | 0.877 INCHES BOTH ENDS |
| SR-5 | MANUFACTURERS CODE | 10001 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| CWTX | HUB NOMINAL DIAMETER | 1.3750 INCHES FIRST END |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.5940 INCHES FIRST END |
| SR-5 | DESIGN CONTROL REFERENCE | 520798 |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.6975 INCHES |
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| ABSA | SPLINE QUANTITY | 6 BOTH ENDS |
| AGJS | PITCH DIAMETER | 2.5000 INCHES NOMINAL |
