| MRC |
Requirement Statement |
Characteristics |
| ADLK |
FIRST LEG LENGTH |
0.875 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
99251 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MATT |
MATERIAL |
STEEL COMP 301 OR STEEL COMP 302 |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.095 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5059,COND 1/4 HARD MIL SPEC SINGLE MATERIAL RESPONSE |
| SR-5 |
DESIGN CONTROL REFERENCE |
1619888-2 |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.110 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.312 INCHES NOMINAL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AHLF |
SECOND LEG WIDTH |
0.375 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.912 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.156 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.188 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.375 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.234 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.188 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.420 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
