| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.394 INCHES MINIMUM AND 0.400 INCHES MAXIMUM FIRST HOLE 0.394 INCHES MINIMUM AND 0.400 INCHES MAXIMUM SECOND HOLE 0.519 INCHES MINIMUM AND 0.525 INCHES MAXIMUM THIRD HOLE |
| ABHP |
OVERALL LENGTH |
3.520 INCHES NOMINAL |
| BYGG |
BLOCK HEIGHT |
0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
07482 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
F50TF7,CL A,CAGEC 07482 MFR REF SINGLE TREATMENT RESPONSE |
| ABMK |
OVERALL WIDTH |
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
1373M71P01 |
| AXPC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES |
1.070 INCHES NOMINAL |
| ABTJ |
MOUNTING HOLE QUANTITY |
2 |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CWTD |
CLAMPING HOLE QUANTITY |
3 |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CWYC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES |
2.265 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4117,T6 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4127,T6 ASSN STD SINGLE MATERIAL RESPONSE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.213 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR |
| CWXZ |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES |
1.070 INCHES NOMINAL |
