| MRC |
Requirement Statement |
Characteristics |
| ABMK |
(NON-CORE DATA) OVERALL WIDTH |
0.312 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.312 INCHES MAXIMUM |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
100.0 DC SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.703 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
1.500 INCHES MINIMUM |
| CWSS |
III DIELECTRIC MATERIAL |
PLASTIC POLYESTER |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
19315-QB99503 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ABHP |
(NON-CORE DATA) OVERALL LENGTH |
0.703 INCHES MAXIMUM |
| CRTP |
TOLERANCE RANGE PER SECTION |
-10.00 TO 10.00 PERCENT SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| AFHW |
III INTERNAL ELECTRICAL CONNECTION TYPE |
EXTENDED FOIL |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
22000.000 PICOFARADS SINGLE SECTION |
| CQBF |
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
25.0 MEGOHM-MICROFARADS |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
1.0000 |
| ADAU |
BODY HEIGHT |
0.203 INCHES MAXIMUM |
| CQJJ |
NONDERATED OPERATING TEMP |
-40.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| SR-1 |
MFR SOURCE CONTROLLING REFERENCE |
QB99503-4 |
| AEBT |
TERMINAL DIAMETER |
0.032 INCHES NOMINAL |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CWSG |
III TERMINAL SURFACE TREATMENT |
SOLDER |
| SR-1 |
MANUFACTURERS CODE |
55974 |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
25000.0 MEGOHM-MICROFARADS |
| ABKW |
(NON-CORE DATA) OVERALL HEIGHT |
0.203 INCHES MAXIMUM |
