| MRC |
Requirement Statement |
Characteristics |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| SR-5 |
DESIGN CONTROL REFERENCE |
1292087-107 |
| STYL |
STYLE DESIGNATOR |
CONCENTRIC HOLE UNTHREADED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE GRIP |
| AASA |
THREAD LENGTH |
0.547 INCHES MINIMUM AND 0.597 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
98897 |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE |
| AASU |
HEAD HEIGHT |
0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
2.432 INCHES MINIMUM AND 2.462 INCHES MAXIMUM |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.437 INCHES MINIMUM AND 0.444 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
LCP77-1082,TY 1,CL 2,36659 MFR REF SINGLE TREATMENT RESPONSE GRIP |
| AATB |
WIDTH BETWEEN FLATS |
1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.294 INCHES MINIMUM AND 2.344 INCHES MAXIMUM FIRST HOLE |
