| MRC |
Requirement Statement |
Characteristics |
| AGGY |
SHANK THREAD LENGTH |
1.5630 INCHES NOMINAL |
| CTLK |
SELF-ALIGNMENT ANGLE |
10.00 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ADZG |
LUBRICATION MATERIAL |
GREASE |
| STYL |
STYLE DESIGNATOR |
DOUBLE ROW, STAGGERED, BALL |
| AGZA |
ALIGNMENT TYPE |
SELF-ALIGNING |
| ABXV |
BORE DIAMETER |
0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| AAZF |
SHANK STYLE |
EXTERNALLY THREADED |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AAJD |
THREAD CLASS |
3A |
| AAZE |
SHANK DIAMETER |
0.4370 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING PLYA-SEALS,FSCM 21335 MFR REF SINGLE MATERIAL RESPONSE SEAL |
| AGVT |
OUTER RING WIDTH |
0.6460 INCHES MINIMUM AND 0.6660 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL ROD END BODY RUBBER SYNTHETIC SEAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| FEAT |
SPECIAL FEATURES |
SHANK SLOTTED0.098 IN. W BY 0.067 IN. DEEP BY 1.890 IN. L |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AGXH |
LENGTH FROM BORE CENTER TO SHANK END |
2.4280 INCHES MINIMUM AND 2.4480 INCHES MAXIMUM |
| AGVU |
INNER RING WIDTH |
0.8650 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM |
| ADGA |
OVERALL OUTSIDE DIAMETER |
1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| AHAW |
SELF-ALIGNMENT LOCATION |
INTERNAL |
| AGYW |
BEARING SEAL TYPE |
CONTACT |
| ABHP |
OVERALL LENGTH |
3.0630 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES |
| AGYJ |
SEAL QUANTITY |
2 |
