| MRC |
Requirement Statement |
Characteristics |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE 49 ASSN STD SINGLE MATERIAL RESPONSE INNER LAYER |
| ADAS |
BODY INSIDE DIAMETER |
2.0519 INCHES MINIMUM AND 2.0529 INCHES MAXIMUM |
| CTMQ |
SURFACE GROOVE LOCATION AND QUANTITY |
1 INTERNAL |
| MATT |
MATERIAL |
COPPER ALLOY INNER LAYER STEEL COMP 1008 OR STEEL COMP 1010 OUTER LAYER |
| AGKT |
LOCKING LUG HEIGHT |
0.0310 INCHES MINIMUM AND 0.0410 INCHES MAXIMUM |
| AGKV |
LOCKING LUG WIDTH |
0.1500 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
44940 |
| SFTT |
SURFACE TREATMENT |
TIN OVERALL |
| CTJM |
ANTIROTATION/LUBRICATION TYPE AND QUANTITY |
2 HOLE |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CTLF |
HOLE SPACING ANGLE |
28.0 DEGREES NOMINAL |
| CTRQ |
DISTANCE FROM LUG END TO END OF BEARING |
0.2300 INCHES MINIMUM AND 0.2375 INCHES MAXIMUM |
| BZLX |
CORNER SHAPE |
SQUARE ALL CORNERS |
| ABHP |
OVERALL LENGTH |
1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
0114-0164 |
| STYL |
STYLE DESIGNATOR |
HALF SLEEVE |
| ADAR |
BODY OUTSIDE DIAMETER |
2.1875 INCHES NOMINAL |
| ADZG |
LUBRICATION MATERIAL |
LUBRICATING OIL |
| AGKU |
LOCKING LUG LENGTH |
0.1900 INCHES MINIMUM AND 0.2200 INCHES MAXIMUM |
| AGKD |
DISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING |
0.5210 INCHES MINIMUM AND 0.5410 INCHES MAXIMUM FIRST |
| AAUB |
HOLE DIAMETER |
0.2400 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM FIRST |
| AGKH |
LUBRICANT ACCOMMODATION STYLE |
GROOVED CIRCULAR |
