| MRC |
Requirement Statement |
Characteristics |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
12.000 INCHES |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED, MIL-A-8625, TYPE 2, CLASS 2 |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED, MIL-A-8625, TYPE 2, CLASS 2 |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADLH |
(NON-CORE DATA) SECOND END FITTING SPEC/STD DATA |
MIL MS27021-17 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQGM |
MAXIMUM OPERATING PRESSURE |
45.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
CAM OR LEVER (INTERNAL) 1ST END CAM OR LEVER (EXTERNAL) 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
590.000 INCHES NOMINAL OVERALL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END STRAIGHT 2ND END |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| AWLS |
CONNECTION TYPE |
INTERNAL QUICK DISCONNECT 1ST END EXTERNAL QUICK DISCONNECT 2ND END |
| ADLP |
QUICK DISCONNECT NOMINAL SIZE |
4.000 INCHES 1ST END 4.000 INCHES 2ND END |
| TEST |
TEST DATA DOCUMENT |
01413-114289 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE OUTER LAYER MOLDED RUBBER |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OIL RESISTANT AND WATER RESISTANT |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, BUNA-N |
| ADLG |
(NON-CORE DATA) FIRST END FITTING SPEC/STD DATA |
MIL MS27025-17 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRSM |
VACUUM IN TORR |
381.0 |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AARX |
INSIDE DIAMETER |
4.000 INCHES NOMINAL |
| ADJS |
EXTERIOR COLOR |
BLACK |
| CRDW |
HYDROSTATIC TEST PRESSURE |
50.0 POUNDS PER SQUARE INCH |
