| MRC |
Requirement Statement |
Characteristics |
| CRHN |
SHAFT SLOT WIDTH |
0.0250 INCHES NOMINAL SINGLE SHAFT |
| AJTA |
ZRS RESISTANCE IN OHMS |
80.00 NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.2410 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJVW |
ALIGNMENT HOLE QUANTITY |
3 |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
136.00 NOMINAL |
| AAVH |
SHOULDER DIAMETER |
0.8123 INCHES NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| CSJY |
TRANSFORMATION RATIO |
1.000 STATOR TO ROTOR NOMINAL |
| AJSW |
ZRO RESISTANCE IN OHMS |
78.00 NOMINAL |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.0620 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.0900 INCHES NOMINAL SINGLE SHAFT |
| AJSY |
ZSO RESISTANCE IN OHMS |
44.00 NOMINAL |
| AAVL |
PILOT DIAMETER |
0.5000 INCHES NOMINAL |
| AJSP |
STATOR INPUT CURRENT RATING |
ANY ACCEPTABLE |
| AJWR |
SHOULDER LENGTH |
0.0630 INCHES NOMINAL |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
ANY ACCEPTABLE |
| CQZS |
SHAFT SLOT DEPTH |
0.0300 INCHES NOMINAL SINGLE SHAFT |
| AJVS |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS |
30.0 CENTIMETER-GRAMS NOMINAL |
| ABKK |
FLANGE DIAMETER |
0.9370 INCHES MAXIMUM |
| AJSL |
BODY SIZE |
10 |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| ABHP |
OVERALL LENGTH |
1.6900 INCHES MAXIMUM |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
10.0 CENTIMETER-GRAMS NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TURRET |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJWQ |
PILOT LENGTH |
0.0380 INCHES NOMINAL |
| CRSJ |
SHAFT TYPE |
ROUND, SLOTTED SINGLE SHAFT |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
138.00 NOMINAL |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
0.6780 INCHES NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.0620 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.3750 INCHES NOMINAL SINGLE SHAFT |
| AAQL |
BODY STYLE |
STANDARD ROUND B |
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
ANY ACCEPTABLE |
| CRKL |
PLUS J ZRS REACTANCE IN OHMS |
20.00 NOMINAL |
