| MRC |
Requirement Statement |
Characteristics |
| BZRR |
THREAD SERIES |
UNF |
| AXFH |
SPLINE LENGTH |
2.000 INCHES NOMINAL |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNF |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
5.371 INCHES MINIMUM AND 5.381 INCHES MAXIMUM |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE OR POSITIVE |
| SR-5 |
MANUFACTURERS CODE |
16764 |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
4.277 INCHES MINIMUM AND 4.287 INCHES MAXIMUM |
| ELEC |
VOLTAGE IN VOLTS |
12.0 |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
950 |
| AKAE |
MAXIMUM OPERATING ALTITUDE RATING |
NOT RATED |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
55.0 |
| SR-5 |
DESIGN CONTROL REFERENCE |
1117332 |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT AND FUNGUS RESISTANT |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
180.0 |
| BCGS |
SHAFT DRIVE END STYLE |
TAPERED SHAFT END, THREADED W/KEYWAY |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
4.875 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
4.500 INCHES NOMINAL |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
0.0 |
| AAUH |
SPLINE MINOR DIAMETER |
0.690 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.500 INCHES NOMINAL |
| AAUK |
SPLINE WIDTH |
0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| BCGN |
GROUNDING METHOD |
INTERNAL |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| ZZZV |
III FSC APPLICATION DATA |
ENGINEELECTRICAL SYSTEM,NONAIRCRAFT |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| BCMG |
TOP MOUNTING HOLE DIAMETER |
0.627 INCHES MINIMUM AND 0.629 INCHES MAXIMUM |
| AAUJ |
SPLINE MAJOR DIAMETER |
0.874 INCHES MINIMUM AND 0.8745 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.844 INCHES NOMINAL |
| AWDP |
THREAD DIAMETER |
0.625 INCHES NOMINAL |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
NOT RATED |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
20 |
| CFHL |
THREAD CLASS |
2A |
| ABSA |
SPLINE QUANTITY |
6 |
