| MRC |
Requirement Statement |
Characteristics |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.406 INCHES MINIMUM AND 0.436 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| CSSQ |
FIRST LEG ANGLE |
168.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.119 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.406 INCHES MINIMUM AND 0.436 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.380 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
10952017 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLF |
SECOND LEG WIDTH |
1.000 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| SR-5 |
MANUFACTURERS CODE |
19207 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL2 FED SPEC ALL TREATMENT RESPONSES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.380 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.000 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| MATT |
MATERIAL |
STEEL |
| ADLL |
SECOND LEG LENGTH |
1.850 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.119 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
