| MRC |
Requirement Statement |
Characteristics |
| CQBF |
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
33.0 MEGOHM-MICROFARADS |
| ADAQ |
BODY LENGTH |
0.800 INCHES MAXIMUM |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
300.0 DC SINGLE SECTION |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
18000.000 PICOFARADS SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ADAU |
BODY HEIGHT |
0.360 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
1.120 INCHES MINIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| TEST |
TEST DATA DOCUMENT |
18876-10189342 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
1000.0 MEGOHM-MICROFARADS |
| ADAT |
BODY WIDTH |
0.890 INCHES MAXIMUM |
| CRDN |
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS |
0.0 TO 70.0 SINGLE SECTION |
| CRTP |
TOLERANCE RANGE PER SECTION |
-1.00 TO 1.00 PERCENT SINGLE SECTION |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CWSG |
III TERMINAL SURFACE TREATMENT |
SOLDER |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.407 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.1300 |
